Aluminium Circle Manufacturer & Exporter

---

What is aluminum circle?

Aluminium Circle also named Aluminium Disc, widely used in electronics, 일일 화학 물질, 약, culture and education, 그리고 자동차 부품. 가전제품, 보온, 기계 제조, 자동차, 항공우주, 군대, 금형, 건설, 인쇄 및 기타 산업. Such as kitchen utensils such as non-stick pans, pressure cookers, 등., and hardware products such as lampshades, water heater shells, 등., are some of the most used Aluminium alloy plate and strip deep-processing products.

허난 화웨이 알루미늄 주식회사, Ltd is mainly engaged in the export trade of Aluminium Circle, Aluminium plates, 코일, 스트립, 벨트, 포일 및 기타 비철금속 제품. We have established long term business shipment with more than 80 국가.

Application of Aluminium Circle

1. 전자제품에 널리 사용됨, 일일 화학 물질, 약, culture and education, 그리고 자동차 부품;
2. 가전제품, 보온, 기계 제조, 자동차, 항공우주, 군대, 금형, 건설, 인쇄 및 기타 산업;
3. Kitchen utensils such as non-stick pans, pressure cookers, 등., and hardware products such as lampshades, water heater shells, 등.

• 

• 

• 

• 

• 

Benefits of Aluminium Circle

• The surface performance of the Circle is good, ensuring no obvious scratches, oil stains, oxidation, black spots, 등;
• Circle specifications are available. In addition to the regular size, Circle with the thinnest 0.5mm and the thickest 6.5mm can be provided;
• When the thickness of the Circle is greater than 1.0 mm, ensure that the edges of the finished product are neat and free of burrs;
• The good control of the coil grain size and elongation in the early stage ensures the excellent deep drawing and spinning performance of the wafer, effectively avoiding the possibility of later processing，Undesirable phenomena such as the drawing pattern, lotus leaf edge, and high ear-making rate;
• Strictly control and test the alloy, state and performance of the coils to ensure the accuracy and diversity of the wafers provided;
• The introduction of advanced and efficient production equipment has improved the production efficiency of wafers and the utilization rate of materials, effectively shortened the production cycle and provided customers with real-time convenient services;
• The Circle are classified in detail, and the exact type can be selected according to the different purposes and requirements of customers;
• The product complies with ROHS and REACH environmental protection standards;
• The product packaging is firm, in line with domestic sales and international export standards.

Aluminum Disc Production

In the process of aluminum disc production, there are several links of particular importance.

1. Billet: the main check grain size and aluminum content, must reach the grain size of grade 1 and more than 99.5% 알루미늄 함량, before the production of aluminum discs, the main factor affecting the grain size is the titanium content of the melting process, we require titanium content of not less than 0.15%, only then can guarantee the quality of the billet, the above 2 indicators The above 2 indicators directly affect whether the aluminum discs will be pulled when spinning to produce aluminum pans, whether the surface of aluminum pans will have orange peel pattern, tiger skin pattern and other undesirable phenomena.
2. Rolling: it is from the billet 6.0mm calendering to the required thickness of aluminum discs. In the process of calendering and rolling, we should strictly control the amount of rolling pressure in each pass, the amount of pressure in each pass is not more than 60%, that is to say, from 1.0mm, the maximum calendering to 0.6mm, the one-time pressure is too large, it will also affect the quality of aluminum products later. The same plate thickness tolerance plus or minus 0.01mm, but also to control the thickness and width.
3. Punching aluminum rolls into aluminum discs, after the stamping workshop receives the rolled aluminum rolls with the required thickness, it starts stamping by checking the thickness, width, and other external dimensions, and this process mainly controls whether the diameter of aluminum discs is correct (diameter tolerance plus or minus), whether the aluminum discs are scratched, whether the aluminum discs are deformed, the side burrs, the number of pieces, 등. As the gap between the upper and lower die will gradually become larger during the use of the stamping die, the edge burr of the aluminum disc will become thicker and longer, which will easily stab the workers’ hands during the later handling and spinning process. So the stamping dies should be checked regularly for tolerance and trimming. Our company adopts precise control of quantity, which means that each set of dies should be trimmed after how many times of stamping.
4. Annealing: turn the aluminum disc in H state into 0 state. Annealing furnace heating time of 6 시간, heating up to about 200 degrees to begin to remove oil and smoke (because this temperature aluminum disc above the rolling oil has begun to atomize), from room temperature heating to 380 degrees, constant temperature of 380 degrees to maintain 20 시간, the length of insulation time will have a great impact on the elongation of aluminum discs, and then cool down the natural cooling.
5. Packaging: in order to prevent the long transport process between the aluminum discs of static electricity, the need to sandwich paper between the aluminum discs, not every piece is added, we control the standard is about 10cm thickness sandwich a paper, and then is waterproof, moisture-proof, such as 4 layers of packaging, the following is fumigated wooden pallets, the top is a multi-layer board of wooden cover, 2 vertical and 2 horizontal steel belt packing.

Our Service

• Sample Services: We provide free samples for test, the delivery charge paid by the customer;
• Customized Services: welcome the customized sample. A professional design team and an excellent mold engineer meet your different demands. After receiving your drawings and mold charge, we will make the sample for you within 7-15 근무일;
• Processing Service：bending, decoiling, welding, punching, cutting;
• After-sales service：we have professional after-sales service personnel who will receive your suggestions 24 hours a day;
• We welcome your agent or third-party organization to conduct inspections or factory inspections.

• 

• 

• 

포장 & 배달

1. Standard airworthy export packaging. Wooden pallets with plastic protection for coils and plates;
2. According to customer requirements, the packaging can face the sky or the wall;
3. 16-20 MT can be put into 20FCL, the shipping price is much cheaper than 40FCL;
4. Delivery time: 15-35 days after receiving the LC or 30% deposit.

• 

• 

• 

자주하는 질문

---