Хэнань Huawei Aluminium Co., ООО. является профессиональным поставщиком и производителем алюминиевых кругов.. Мы предлагаем высококачественные алюминиевые круги толщиной от 0,3 мм до 4 мм и диаметром от 80 мм до 1600 мм., который удовлетворит ваши потребности в изготовлении посуды, такой как кастрюли, кастрюли, фритюрницы и т. д.. посуда, посуда, Сковорода/кастрюля с антипригарным покрытием, Миска или чашка, дорожный знак и так далее.
Production line processing
The main components of the aluminum circle unwinding and blanking production line are: loading trolley, uncoiler, leveler, feeder, swing unit, special closed single-point mechanical press, rapid die change device, palletizing unit, scrap shear Cutting, hydraulic system, electrical control system, так далее.
Technical characteristics of production line
Full-automatic numerical control, the production line should be started from the unwinding of the coil until the entire roll of material is completed. No manual contact with any work materials and no adjustments are required in the middle, which fundamentally eliminates the hidden production safety hazards of ordinary punch press production and Product quality hazards. The line can use the coil material to directly produce wafers without slitting and cross-cutting the coil material, which reduces the production process, reduces the production cost, and reduces the possibility of damage to the surface of the coil material. The wafer is guaranteed to be free of oil stains and scratches.
This line makes full use of the width of the roll material, and uses a high-precision servo motor drive system to control the distance between the wafer and the distance between the wafer and the material edge to a minimum, fundamentally reducing the amount of waste, and making the raw material utilization rate reach 80% выше.
The production speed can reach 40-55 pieces per minute, which improves the production efficiency. Due to the use of modular mold design, the conversion time can be reduced to less than 15 minutes when converting the wafer production specifications. The diameter of the discs can be produced from 85 mm to 750 мм. Advanced uncoiling system, six-leveling machine, high rigidity mechanical press, automatic palletizing system, и т. д., to ensure the high quality of wafer products.
Feature
- Wide range of selection on circles’ size.
- Excellent Surface Quality for lighting reflectors.
- Excellent hydrulic deep drawing and spinning quality.
- We provide heavy gauge circles with thicknesses up to 5mm diameter up to 1200mm, which would meet all your needs.
- Anodizing quality and hydrylic deep drawing quality which is suitable for cookware as well.
- Well-protected packing.
- Surface bright or mill finished ( customizable ), clean, flat, no wholes, без царапин, no oxidation, no oil stain, no dent, no inclusion, без царапин, no stain, no oxide dicoloration, no breaks, no corrosion, no roll marks, no dirt streaks and other defect which will interfere with use.
- глубокий рисунок, cutting edge- neat cutting edge with no burrs.
- Fastest producing in China
- 30KG/40KG package is OK, Fine finish, Accurate dimension, Robust construction, Rust resistance and Durable.
Punch processing
- Cutting blanks (cut into squares)
- Гашение (punched into the aluminum circle you want)
If it is aluminum coil raw material, we need to add an uncoil in front.
Al Alloy
- 1ххх ( 1000 )Ряд: 1050, 1060, 1070, 1100( aa1100 ), 1200
- 3ххх ( 3000 )Ряд: 3003, 3004, 3020, 3105
- 5ххх ( 5000 )Ряд: 5052, 5083, 5730
- 6ххх ( 6000 )Ряд: 6061
- 7ххх ( 7000 ) Ряд: 7075
- 8ххх ( 8000 ) Ряд
Alu Temper
О – H112: HO, Н24
T6
Sizes ( diameter/length )
Small Sizes: 10мм, 12мм, 18мм, 19мм, 20мм, 22мм, 25мм, 30мм(3cm), 32мм, 35мм(3.5cm), 36мм, 38мм ( 3.8 cm ), 40мм ( 4cm ), 44мм, 70мм, 75мм, 80мм(8cm), 85мм, 90мм, 100 мм, 115мм, 180мм, 230мм ( 1 inch, 1.25 inch, 1.5 inch, 3.5″, 4 inch )
Large Sizes: 200мм(20cm), 400мм, 600 мм, 1200мм, 2500мм ( 12″, 14 inch(14″), 26 inch, 72 inch )
Толщина
1.0мм, 1.5мм, 2.0мм, 2.5мм, 3мм, 4мм, 1/4″ thick ( 3/16 inch )
Technique
DC grade, CC grade
Обработка поверхности
- Анодированный: anodizing in the surface
- Sublimation: handysub dye sublimation, white sublimation, double sided sublimation
- Induction: with bonded full induction base disk
- Mirror: reflective mirror finish, bright finish
- Colored Coating: default silver
- Powder Coated
- Brushed
- Printed
Приложение
Use for cookware products, плита высокого давления, high press cooking pot, посуда, industry furnace, dinner plate, whistling kettle, cafe tray, craft, LED bulbs, food dish, furniture
Service
We are a professional aluminum circle manufacturer and supplier Huawei aluminum provides you factory wholesale aluminium circle price, just tell us your requirement, we will provide you EXW, FOB, CFR, CIF, DDP., DDU aluminium circle price.
- Wholesale aluminium circle price
- Excellent aluminum circle quality
- Fast delivery
- Delivery Guaranteed
- Well-protected package
- Excellent after-sales service
- Free sample accepted
- Payment terms we can accept: T/T/ L/C, D/A, D/P, Western Union, MoneyGram etc
Advantage
Good quality pure aluminum or alloy
aluminium circle Surface Finish: Bright & smooth surface, without flow lines, slightly oiled to avoid White rusting. Smooth, Brightly , No Zone of Fracture, No Scratched, No oil Sludge
Quality of Material: Totally free from defects like White Rust, Oil Patches, Roll Marks, Edge Damage, Camber, Dents, Holes, Break Lines, Scratches and free from coil set.
We enjoy a good reputation among our customers for our aluminium circle cookware with high quality and competitive price, win high appreciation from our clients with the excellent workman-ship and professional ability. The quality matches with ISO 9001 quality management system.
Упаковка
- Put the driers side the aluminium circle , keep the products dry and clean.
- Use the clean plastic paper , packing the aluminium circle , keep good sealing.
- Use the snakeskin paper , packing the surface of the plastic paper , keep good sealing.
- Следующий, there are two ways of packaging:
- One way is wooden pallet packaging , using the crusty paper packing the surface;
- Another way is wooden case packaging , using the wooden case packing the surface.
- Final, lay the steel belt on the wooden box ‘s surface , keep the wooden box fastness and secure.
Countries that have been exported
Africa: Morocco, Ethiopia, Egypt etc …
Вьетнам, Ukraine, Tailand, Turkey, Индия, Малайзия, Italy etc …