5000 series alloy aluminium circle
5000 series alloy aluminum circle contains 3-5% magnez, so it is also called aluminum-magnesium alloy, and also contains a small amount of manganese and other elements. 5xxx series aluminum discs have excellent strength and corrosion resistance and are suitable for a wide range of applications such as cookware, części samochodowe, and electronic products.
5xxx series aluminum circle features
5000 series aluminum discs are aluminum alloy materials. This alloy has a series of excellent properties, including low relative density, high tensile strength, high elongation, dobra odporność na korozję, good welding performance and good fatigue resistance. Under the same area, the weight of aluminum-magnesium alloy is lower than other series, so it is widely used in conventional industries.
Koło aluminiowe 5000 series element content
Here’s a table summarizing the typical elemental composition of the aluminum alloys 5052, 5083, 5086, I 5754:
| Element | Stop 5052 | Stop 5083 | Stop 5086 | Stop 5754 |
|---|---|---|---|---|
| Magnesium | 2.2 – 2.8% | 4.0 – 4.9% | 3.5 – 4.5% | 2.6 – 3.6% |
| Chromium | 0.15 – 0.35% | 0.05 – 0.25% | 0.05 – 0.25% | 0.3% |
| Iron | 0.0 – 0.25% | 0.0 – 0.4% | 0.0 – 0.5% | 0.0 – 0.4% |
| Copper | 0.1% | 0.1% | 0.1% | 0.1% |
| Manganese | 0.1% | 0.4 – 1.0% | 0.2 – 0.7% | 0.5% |
| Silicon | 0.25% | 0.4% | 0.4% | 0.4% |
| Zinc | 0.1% | 0.25% | 0.25% | 0.2% |
| Titanium | 0.1% | 0.15% | 0.15% | 0.15% |
| Inni | 0.05% | 0.15% | 0.15% | 0.15% |
| Aluminum | Balance | Balance | Balance | Balance |
5 series aluminium circle alloy specification
In the 5000 stopy szeregowe, there are many types of aluminum metal that can be processed into aluminum circles. Aluminum discs or discs made of 5000 series alloys usually use alloys such as 5052, 5083, 5086 Lub 5754. These alloys are commonly used for their excellent corrosion resistance, dobra formowalność, and moderate strength.
5052 alloy aluminum circle
5052 dysk aluminiowy is a round aluminum disc made of 5052 stop aluminium jako główny materiał. 5052 aluminum alloy is an alloy with medium strength, good formability and excellent weldability. It is mainly composed of aluminum, magnesium and a small amount of manganese. The density of 5052 alloy is low, the finished product is light in weight, and it has good tensile strength and fatigue strength, making it widely used in many fields.
5083 alloy aluminum circle disc
5083 tarcza aluminiowa to okrągła tarcza aluminiowa wykonana z 5083 stop aluminium jako główny materiał. 5083 aluminum alloy belongs to the Al-Mg-Si series alloy. Aluminum disc 5083 has good formability, odporność na korozję, weldability and medium strength. 5083 stop aluminium circle has excellent corrosion resistance and can resist corrosion in a variety of environmental conditions
5086 alloy aluminum circle disc
While 5086 aluminum is less commonly used to make discs or discs than alloys like 5052 Lub 5083, it is still possible to produce aluminum discs from the 5086 stop. 5086 aluminum is a high-strength alloy primarily alloyed with magnesium. Aluminum circle has excellent corrosion resistance in marine environments and has good formability. Its primary applications include marine components, okrętownictwo, and structural applications where strength and corrosion resistance are critical.
5754 alloy aluminum circle disc
5754 aluminum disc is one of the 5000 szeregowe stopy aluminium. 5754 is a typical Al-Mg alloy containing 2.6~3.6% magnesium. The addition of this alloy causes Mg₂Si to precipitate in the matrix, thereby providing a strengthening effect. 5754 aluminum discs have high strength resistance, excellent resistance to atmospheric and marine corrosion, and excellent weldability, making them suitable for anodizing protection.
5000 series aluminum circle mechanical properties
| Elastic (Young’s, Tensile) Modulus | 68 GPa |
| Elongation at Break | 1.1 – 23 % |
| Fatigue Strength | 38 – 86 MPa |
| Poisson’s Ratio | 0.33 |
| Shear Modulus | 26 GPa |
| Shear Strength | 70 – 130 MPa |
| Wytrzymałość na rozciąganie: Ultimate (UTS) | 110 – 230 MPa |
| Wytrzymałość na rozciąganie | Yield (Proof) 40 – 210 MPa |
| Brinell Hardness | 28 – 64 |
Aluminum circle disc 5000 series product specification
| Stop | 5052,5083,5005,5454,5754 |
| Hartować | H12,H14,H16,H32,H34,H111,H112,HO |
| Grubość | 0.5-12mm |
| Średnica | 50-1200mm |
| Standard | W,ON,GBT,ASTM |
| Supplier | Aluminium Huawei |
| Technique | DC grade, CC grade |