3003 aluminum alloy is AL-Mn series alloy, which is the most widely used anti-rust aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum) and cannot be strengthened by heat treatment. W związku z tym, cold working methods are used to improve its mechanics. Wydajność: High plasticity in the annealed state, good plasticity during semi-cold work hardening, low plasticity during cold work hardening, dobra odporność na korozję, głębokie rysowanie, good weldability, and poor machinability.
Parameters
Equivalent name
Aluminium alloy 3003 also corresponds to the following designations:
a3003, aa3003, a3003p, 3003mod
Hartować
Common tempers: O ( HO ), H12, H14 etc
Chemical Properties
|
Stop
|
I
|
Fe
|
Cu
|
Mn
|
Mg
|
Kr
|
W
|
Zn
|
Ca
|
V
|
Z
|
Inny
|
Min. A1
|
|
3003
|
0.6
|
0.7
|
0.05-0.2
|
1.0-1.5
|
–
|
–
|
–
|
0.1
|
–
|
–
|
–
|
0.15
|
96.95-96.75
|
3003 aluminum circle for hard anodizing
The properties of aluminum circles (or shaped blanks) make them ideal for use in a number of markets including the cookware, automotive and lighting industries:
- Low anisotropy, which facilitates deep drawing
- Strong mechanical properties
- High and homogeneous heat diffusion
- Ability to be enameled, covered by PTFE (lub inne), anodized
- Good reflectivity
- High strength-to-weight ratio
- Durability and resistance to corrosion
Jakie są zastosowania 3003 aluminiowe koło?
3003 alloy aluminum circles are mainly used for kitchen, traffic sign, whistling kettle etc
Kitchen cookware: pot, pizza pan, non-stick cooker etc
Why choose us?
Henan Huawei Aluminium Co., Sp. z o.o. jest liderem wielu producentów i dostawców aluminium w Chinach. Ściśle kontrolujemy jakość i koncentrujemy się na klientach. We hope to have in-depth cooperation with you and provide you with high quality aluminium material products custom OEM services. Jeśli chcesz uzyskać najnowsze i najlepsze ceny za kg lub za tonę standardowej wagi, proszę skontaktuj się z nami.
Aluminum Ingot/ Master Alloys —-> Aluminum Melting Furnace —-> Aluminum Slab —-> Walcowanie na gorąco (Direct Cast) Or Cold Rolling (Cold Cast) —-> Punching —-> Annealing Furnace —-> Final Inspection —-> Packing —-> Dostawa
Uszczelka
Put the driers side the aluminium circle , keep the products dry and clean.
Use the clean plastic paper , packing the aluminium circle , keep good sealing.
Use the snakeskin paper , packing the surface of the plastic paper , keep good sealing.
Następny, there are two ways of packaging: One way is wooden pallet packaging , using the crusty paper packing the surface;Another way is wooden case packaging , using the wooden case packing the surface.
Final, lay the steel belt on the wooden box ‘s surface , keep the wooden box fastness and secure.
